Microstructural evolution during pressureless infiltration of aluminium alloy parts fabricated by selective laser sinteringPENG YU; SCHAFFER, G. B.Acta materialia. 2009, Vol 57, Num 1, pp 163-170, issn 1359-6454, 8 p.Article

The formation of AIN crystals in an Fe-Mn-Al-C alloy during the nitriding processJAW, Jyh-Hong; CHENG, Wei-Chun; WANG, Chaur-Jeng et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 9, pp 2289-2296, issn 1073-5623, 8 p.Article

Fabrication of Al-3.7 Pct SiC-0.18 Pct Mg Foam Strengthened by AIN Particle Dispersion and its Compressive PropertiesYEONG HWAN SONG; TANE, Masakazu; IDE, Takuya et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 8, pp 2104-2111, issn 1073-5623, 8 p.Article

ION BEAM TECHNIQUES COMBINING INSULATOR DEPOSITION AND HYDROGEN PLASMA ETCHING FOR III-IV COMPOUND METAL/INSULATOR/SEMICONDUCTOR DEVICE APPLICATIONSSIBRAN C; BLANCHET R; GARRIGUES M et al.1983; THIN SOLID FILMS; ISSN 0040-6090; CHE; DA. 1983; VOL. 103; NO 1-2; PP. 211-219; BIBL. 16 REF.Article

Mécanisme de frittage sous charge du nitrure d'aluminium et de l'oxynitrure AlON-γ = Pressure sintering mechanisms of aluminium nitride and oxynitride AlON-γADO, G; BERNACHE, D; BILLY, M et al.Revue de chimie minérale. 1985, Vol 22, Num 4, pp 473-483, issn 0035-1032Article

A1N_x and a-SiO_x coatings with corrosion resistance properties for dental implantsGAZIA, Rossana; MANDRACCI, Pietro; MUSSANO, Federico et al.Surface & coatings technology. 2011, Vol 206, Num 6, pp 1109-1115, issn 0257-8972, 7 p.Article

Thermal fatigue and failure of electronic power device substratesPIETRANICO, S; POMMIER, S; LEFEBVRE, S et al.International journal of fatigue. 2009, Vol 31, Num 11-12, pp 1911-1920, issn 0142-1123, 10 p.Conference Paper

Deposition of Ti-Al-N coatings by thermal CVDWAGNER, J; EDLMAYR, V; PENOY, M et al.International journal of refractory metals & hard materials. 2008, Vol 26, Num 6, pp 563-568, issn 0958-0611, 6 p.Article

The emergence and disappearance of a high density of microcracks in nitrided Fe-4.65 at. % Al alloyMEKA, Sairamudu; HOSMANI, Santosh S; CLAUSS, Arno R et al.International journal of materials research. 2008, Vol 99, Num 7, pp 808-814, issn 1862-5282, 7 p.Article

Characterization of aluminium nitride and aluminium oxide thin films sputter-deposited on organic substratesSCHMID, U; ABABNEH, A; SEIDEL, H et al.Microsystem technologies. 2008, Vol 14, Num 4-5, pp 483-490, issn 0946-7076, 8 p.Conference Paper

Improving the corrosion protection of aluminium alloys using reactive magnetron sputteringSCHÄFER, H; STOCK, H.-R.Corrosion science. 2005, Vol 47, Num 4, pp 953-964, issn 0010-938X, 12 p.Article

First principle study of valence-band offsets at AlN/diamond heterojunctionsSILVESTRI, Leonardo; CERVENKA, Jiri; PRAWER, Steven et al.Diamond and related materials. 2013, Vol 31, pp 25-29, issn 0925-9635, 5 p.Article

Effects of sapphire annealing on the structural properties of AIN thin films grown by molecular beam epitaxyYUN LIU; JIA ZHANG.Physica. B, Condensed matter. 2010, Vol 405, Num 6, pp 1643-1646, issn 0921-4526, 4 p.Article

Temperature dependent ultrasonic properties of aluminium nitridePANDEY, D. K; YADAV, R. R.Applied acoustics. 2009, Vol 70, Num 3, pp 412-415, issn 0003-682X, 4 p.Article

THE INFLUENCE OF ALUMINIUM NITRIDE ON THE HOT DUCTILITY OF ULTRA HIGH PURITY STEELS = EFFET DES NITRURES D'AL SUR LA DUCTILITE A CHAUD DES ACIERS ULTRA PURSHERITIER P; FOURDEUX A; KOBYLANSKI A et al.1981; SCR. METALL.; ISSN 0036-9748; USA; DA. 1981; VOL. 15; NO 7; PP. 753-755; BIBL. 11 REF.Article

Oxygen behavior of normal and HIP sintered AlNISHIZAKI, K; WATARI, K.The Journal of physics and chemistry of solids. 1989, Vol 50, Num 10, pp 1009-1012, issn 0022-3697, 4 p.Article

Synthesis of TiAIN based coating on mild steel substrate using combined laser/sol-gel techniqueSUNDAR, M; KAMARA, A. M; MATIVENGA, P. T et al.Surface & coatings technology. 2010, Vol 204, Num 16-17, pp 2539-2545, issn 0257-8972, 7 p.Article

Excimer laser decoating of chromium titanium aluminium nitride to facilitate re-use of cutting toolsSUNDAR, M; WHITEHEAD, D; MATIVENGA, P. T et al.Optics and laser technology. 2009, Vol 41, Num 8, pp 938-944, issn 0030-3992, 7 p.Article

Aluminum nitride (AlN)MATTHEW, D. V.American Ceramic Society bulletin. 1999, Vol 78, Num 6, pp 69-71, issn 0002-7812Article

Une céramique polycristalline transparente: l'oxynitrure d'aluminium = A polycrystalline transparent ceramic: aluminium oxynitrideADO, G; BILLY, M; GUILLO, P et al.L' Industrie céramique (Paris). 1985, Num 792, pp 173-174, issn 0019-9044Article

Structural effects of energy input during growth of Ti₁ - _xAl_xN (0.55 ≤ x ≤ 0.66) coatings by cathodic arc evaporationANDERSSON, J. M; VETTER, J; MÜLLER, J et al.Surface & coatings technology. 2014, Vol 240, pp 211-220, issn 0257-8972, 10 p.Article

Abrasive wear resistance of Ti_1-xAl_xN hard coatings deposited by a vacuum arc system with lateral rotating cathodesDING, Xing-Zhao; BUI, C. T; ZENG, X. T et al.Surface & coatings technology. 2008, Vol 203, Num 5-7, pp 680-684, issn 0257-8972, 5 p.Conference Paper

Characterisation and applications of Cr-Al-N coatingsSPAIN, E; AVELAR-BATISTA, J. C; LETCH, M et al.Surface & coatings technology. 2005, Vol 200, Num 5-6, pp 1507-1513, issn 0257-8972, 7 p.Conference Paper

STUDY OF THE METHOD OF CONTROLLING THE PRECIPITATION BEHAVIOUR OF MNS AND ALN IN UNIQUE MANUFACTURING PROCESS OF GRAIN ORIENTED 3% SILICON STEELKOIZUMI M; KIKUTI T; BANDO S et al.1980; TETSU TO HAGANE; JPN; DA. 1980-08; VOL. 66; NO 9; PP. 1351-1360; BIBL. 14 REF.Article

Oxidation Kinetics of AIN Under CO₂ AtmospherePENG LI; LIDONG TENG; MIN GUO et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2012, Vol 43, Num 2, pp 406-412, issn 1073-5615, 7 p.Article